top of page
This site was designed with the
.com
website builder. Create your website today.Start Now

Painting of Roads

 

Preparation of surface:

  • New roads: leave at least 24 hours for solvents to escape before paintng.

  • Existing roads: No preparation is needed.

  • Areas to be treated should be free from all dirt, oil, grease and loose particles.

  • Remove excessive grease efficiently with a degreasing agent.

  • Rinse with clean water and allow to dry

  • Clean with hard broom. Remove looses aggregate.

 

 Note:

  • B-Earth Products must be stirred well before use.

  • Products can be applied by paintbrush, paint roller or spray gun

  • Where artwork is to be painted apply B-road allow for one (1) or two (2) coats..

 

Application:

 

  • Apply B-road of colour choice. Allow for one (1) or two (2) coats.

 

Cleaning:

  • Products are water based

  • Clean all equipment thoroughly with water immediately after use.

bottom of page